Kyocera KM-2540 Operation Manual page 28

1-14
N: The additional operation will NOT work with the initial operation.
Sending Multiple Sets of Documents in One Batch (Batch
Transmission function)
Any time the destination as well as the scheduled time of transmission is
the same for separate sets of documents in memory, up to 10 of these
multiple sets of documents will be automatically pooled together and
transmitted during the same communication.
This Batch Transmission function eliminates the need for you to dial the
same destination multiple times, thereby lowering communication costs.
Note Direct Feed Transmissions will not be included in a Batch
Transmission.
If you register the same destination fax number for two separately
scheduled Broadcast Transmissions, those transmissions will not
be included in a Batch Transmission even if they are scheduled
for the same time.
When the start time for a scheduled communication arrives and
another communication to the same party is currently waiting for
automatic redialing, both communications will be grouped
together and sent using Batch Transmission.
When Restricted Access is turned ON, only communications that
were scheduled using the same ID-code will be sent using Batch
Transmission. Therefore, if different ID-codes were used when
scheduling two separate communications, those documents will
be transmitted separately even if the destination and the
scheduled time of transmission are the same.
Rotating the Document Image for Transmission (Rotate &
Transmit function)
If 11 × 8
1/2
Processor or on the platen, this function will automatically rotate the
scanned data 90° counter-clockwise and transmitted them as 8
[A4] (length-wise) documents.
Note To enable the Rotate & Transmit function for documents set
in the Document Processor, you must select Standard size when
setting the document size for scanning from the Document
Processor. (Refer to Setting the Document Size for Scanning from
the Document Processor (Scan from DP setting) on page 6-15.)
The Rotate & Transmit function will only engage for 11 × 8
size documents.
Verifying IDs With the Other Party Using F-Codes (F-Code
Based Communication)
F-Code Based communication refers to communication in which data is
sent and received with sub-addresses and passwords attached in
conformance with the ITU-T (International Telecommunication Union)
recommendations. F-Codes make it possible to communicate with third-
party F-code-compliant machines using modes that were previously only
available between our own machines. These modes include confidential
communication and relay broadcast transmission.
Fax Operation (Names of Parts / Preparations / Features and Functions of this Fax)
" [A4] (width-wise) size documents are set in the Document
× 11"
1/2
" [A4]
1/2