Making Volume Settings (Volume Setting) - Kyocera KM-2540 Operation Manual

System Menu / Counter
System Menu
Copy FAX
Default Default
Machine
Default
System Menu / Counter
Set Volume
Buzzer Volume Monitor Volume Speaker Volume
Maximum Maximum Maximum
Minimum Medium Medium
Off Minimum Minimum
Off
Off Off
Various Settings and Registration

Making Volume Settings (Volume setting)

The volume of the alarm, the monitor and the speaker can be adjusted
here, or you can make the alarm inaudible.
Alarm Volume
Sets the volume of the alarm that sounds in the event of an error or when
you press an incorrect key on the operation panel.
Monitor Volume
Sets the volume of the internal speaker that allows you to listen to
conditions on the telephone line when the [On-hook] key was NOT
pressed.
Speaker Volume
Sets the volume of the internal speaker that allows you to listen to
conditions on the telephone line when the [On-hook] key WAS pressed.
1
2
3
4
Job
Language
Accoun
MP Tray
Setting
Register Print
Orig. Size Report
5
6
Ba
7
8
Note If you want to cancel the procedure part way through, press
the Reset key. The touch panel will return to the initial mode
settings.
Press the System Menu/Counter key. The System Menu / Counter
screen will appear.
Press the [Fax Default] key.
Press the [ ] cursor key until Set Volume (Set the sound volume) is
highlighted.
Press the [Change #] key.
Select the desired alarm volume from among Maximum, Minimum
and Off.
Select the desired monitor volume from among Maximum, Medium,
Minimum and Off.
Select the desired speaker volume from among Maximum, Medium,
Minimum and Off.
Press the [Close] key. If you are finished making settings, press the
Reset key to return to the initial mode.
6-13