Managing Information For A Scheduled Communication (Editing A Communication In Memory); Managing Information For A Scheduled Communication; Printing Out A Sample Image Of Waiting Documents - Kyocera KM-2540 Operation Manual

Ready for fax transmission.
Place the original & assign destination.
Dest
Address TX
Abbrev.
book setting
Basic Application
Option screen
Select item.
Sub.conf. Reserved
TX Polling
box input TX status
Sub.conf. TX result
RX Polling
box output on LCD
Print encr RX result
data box on LCD
Basic Application
Reserved communication status.
Reservation status
Doc #: 025. Send (No.party:
123456
Start Time: 22:22. TX No.of pages:
3-16
Managing Information for a Scheduled
Communication (Editing a Communication in
Memory)
You can modify certain information relating to a scheduled
communication that uses the timer or even cancel the communication
completely. You can also print out a sample image of the corresponding
documents as well as initiate (force-start) the communication without
waiting for the actually scheduled start time.

Printing Out a Sample Image of Waiting Documents

If you want to check the documents that correspond to a specific
transmission that is in memory and waiting for transmission, you can
print out a sample page of those documents.
1
Register Print Report
2
Register Print Report
3
001. )
001.
1/2.
Note If the scheduled communication begins automatically while
you are in the middle of any editing operation, it will impossible to
continue that procedure.
Note Even if you print out a sample image of the documents, the
transmission will be carried out on schedule.
If you want to cancel the procedure part way through, press the
Reset key. The touch panel will return to the initial mode settings.
Press the [Application] key. The Application screen will appear.
Press the [Reserved TX status] key.
The content of the first schedule communication will be displayed.
Use the [ ] and/or [ ] cursor keys to switch to the communication
that you want.
Fax Operation (Advanced)