Displaying 802.1X Configuration, Statistics, And Counters; Show Commands For Port-Access Authenticator - HP Q.11.XX Manual

Displaying 802.1X Configuration,
Statistics, and Counters
802.1X Authentication Commands
802.1X Supplicant Commands
802.1X Open VLAN Mode Commands
802.1X-Related Show Commands
show port-access authenticator
show port-access supplicant
Details of 802.1X Mode Status Listings
RADIUS server configuration

Show Commands for Port-Access Authenticator

Syntax: show port-access authenticator [[e] < port-list >]
[config | statistics | session-counters]
• Without [< port-list > [config | statistics | session-
• With < port-list > only, same as above, but limits port
• With [< port-list > [config | statistics | session-counters]],
• With [config | statistics | session-counters] only,
For descriptions of [config | statistics | session-counters]
refer to the next section of this table.
Configuring Port-Based and Client-Based Access Control (802.1X)

Displaying 802.1X Configuration, Statistics, and Counters

page 8-17
page 8-42
page 8-26
below
page 8-53
page 8-50
pages 8-24
counters]], displays whether port-access
authenticator is active (Yes or No) and the status of
all ports configured for 802.1X authentication. The
Authenticator Backend State in this data refers to the
switch's interaction with the authentication server.
status to only the specified port. Does not display
data for a specified port that is not enabled as an
authenticator.
displays the [config | statistics | session-counters] data
for the specified port(s). Does not display data for a
specified port that is not enabled as an authenticator.
displays the [config | statistics | session-counters] data
for all ports enabled as authenticators.
8-47