set alarm
Description Controls the display of alarms in the session output stream or clears the alarm log.
Authority Admin session for the clear operand. Otherwise, none.
Syntax
set alarm [option]
Operands
[option]
Table 32
Table 32
Parameter
clear
on
off
Examples The following is an example of the set alarm command:
8/20q FC Switch #> set alarm on
194 Command reference
describes the output stream alarm parameters.
Output stream alarm parameters
Description
Clears the alarm log history. This value requires an Admin session.
Enables the display of alarms in the session output stream.
Disables the display of alarms in the session output stream.
Disabling the display of alarms in the output stream allows
command scripts to run without interruption.