Table 7
identifies SAN Switch Rack Mount Kit rails and rail mounting hardware.
Table 7
SAN Switch Rack Mount Kit hardware
Item
38
Installing and configuring
Description
(2) rear mounting brackets
A right inner rail and a right outer rail
A left inner rail and a left outer rail
(10) #8-32 x 3/16-inch Phillips pan-head screws with
thread lock, for use with the SAN Switch 4/32.
(14) #8-32 x 5/16-inch Phillips pan-head SEMS screws for
use with the SAN Switch 2/8V, SAN Switch 2/16V, SAN
Switch 2/16N.
(10) #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock washer
(8) #10 alignment washers