San Switch 2/8V, 2/16V And 2/16N Chassis; San Switch 2/8V, 2/16V And 2/16N-Port Side; Port Side Of San Switch 2/8V - HP AA979A - StorageWorks SAN Switch 2/8V Installation Manual

• 8 or 16 Fibre Channel ports, with the following characteristics:
• Automatic negotiation to the highest common speed of all devices connected to port.
• Port interfaces compatible with small form factor pluggable (SFP) transceivers, both
short wavelength (SWL) and long wavelength (LWL).
• Universal and self-configuring ports: capable of becoming an F_Port (fabric enabled),
FL_Port (fabric loop enabled), or E_Port (expansion port).
•
One RS-232 serial port, designed to connect to a DTE port.
• One 10/100 Mb/sec Ethernet port with an RJ-45 connector.
• One (SAN Switch 2/8V) or two (SAN Switch 2/16V) built-in power supplies.
• A real-time clock (RTC) with 10-year battery
• Plenum, part number 5697-4919

SAN Switch 2/8V, 2/16V and 2/16N chassis

The following sections illustrate the chassis front and rear panels.
SAN Switch 2/8V, 2/16V and 2/16N—port side
You can see the physical differences between the SAN Switch 2/8V and the SAN Switch
2/16V switches in the following figures. The most noticeable difference is the number of ports.
Figure 1 shows the port side of the SAN Switch 2/8V.
All LEDs reside on the port side of the switches. The nonport side is used for air intake. The
SAN Switch enclosures have forced-air cooling, with the fans pushing the air from the nonport
side of the chassis through the enclosure, and exhausting to the port side.
See "Interpreting LED
1
Figure 1

Port side of SAN Switch 2/8V

Table 1
SAN Switch 2/8V port side components
Number
1
2
activity" on page 64 for a complete description of switch LEDs.
2
IOIOI
100-240 VAC 1.0A 47-63Hz
Description
AC power receptacle
Ethernet port
SAN Switch 2/8V, 2/16V, 2/16N and 4/32 installation guide
Table 1
4
3
!
0 1 2 3
4 5 6 7
identifies port side components.
0018a
19