Refer to the tsTimeZone command in the
detailed information about the command parameters. All supporting Fabric OS documentation
resides on the Software CD that shipped with your switch.
3.
Repeat Steps 1 and 2 on all switches for which the time zone needs to be set.
This needs to be done only once, because the value is stored in nonvolatile memory.
For U.S. time zones, see
command.
Table 9
tsTimeZone command parameter selection
Local Time
Atlantic Standard
Atlantic Daylight
Eastern Standard
Eastern Daylight
Central Standard
Central Daylight
Mountain Standard
Mountain Daylight
Pacific Standard
Pacific Daylight
Alaskan Standard
Alaskan Daylight
Hawaiian Standard
60
Installing and configuring
HP StorageWorks command reference guide
Table 9
to determine the correct parameter for the tsTimeZone
tsTimeZone parameter
-4,0
-3,0
-5,0
-4,0
-6,0
-5,0
-7,0
-6,0
-8,0
-7,0
-9,0
-8,0
-10,0
for more