San Switch Rack Mount Kit Hardware - HP AA-RWF3A-TE Installation Manual

Table 4 SAN Switch Rack Mount Kit hardware
Item Description
Two rear mounting brackets
A right inner rail and a right outer rail
A left inner rail and a left outer rail
14 #8-32 x 3/16-inch Phillips pan-head screws with
thread lock for use with the SAN Switch 2/32 only.
14 #8-32 x 5/16-inch Phillips pan-head SEMS screws
for use with the 4/8, 4/16, 4/32, 4/64 and 4/32B
SAN Switches (All require ten screws, except for the
4/32B SAN Switch which requires six screws)
Ten #10-32 x 1/2-inch Phillips pan-head screws with
captive star lock-washers
Eight #10 alignment washers
Eight #10 adapter washers
Two 1/4-20 hex nuts with captive star lock-washers
Two 1/4-inch flat washers
42
Installing and configuring SAN Switches