• For an HP System/e rack, install two #10-32 x 1/2-inch Phillips pan-head screws
with captive star lock washers and two #10 alignment washers in the upper and
lower hole locations of the right rail. Then install two #10-32 x 1/2-inch Phillips
pan-head screws with captive star lock washers and two #10 alignment washers in
the upper and lower hole locations of the left rail. See
Figure 11
Assembling the outer rails (HP System/e rack)
5.
The SAN Switch Rack Mount Kit provides different screw types for securing the inner rails.
Specific switches require a different number of these screws. See
appropriate number of screws.
CAUTION:
can cause damage to internal components.
44
Installing and configuring
Do not use any screws other than the ones provided. Use of any longer lengths
Figure
11.
Table 8
to determine the