Collect The Required Items; Verify The Kit Contents; Q Fibre Channel Switch Rack Mount Kit Hardware - HP AK241A - StorageWorks 8Gb Simple SAN Connection Installation And Reference Manual

Collect the required items

NOTE: The rack mount kit installation requires one technician.
Locate the following items and set them aside:
• 8/20q Fibre Channel Switch
• 8/20q Fibre Channel Switch rack-mount kit
Smaller items, such as screws, ship in plastic bags in the kit. See
•
Required tools:
• #2 Phillips screwdriver
• 7/16-inch wrench

Verify the kit contents

Check the contents of the 8/20q Fibre Channel Switch rack mount kit shipping carton to verify that all
required parts and hardware are available
Table 8

8/20q Fibre Channel Switch rack mount kit hardware

Item
32
Description
Two (2) rear mounting brackets
Two (2) switch rails
One (1) filler panel (optional), see
Ten (10) M6 machine screws
Ten (10) M6 cage-nuts for square rack holes
Ten (10) M6 cage-nuts for round rack holes
Four (4) 10-32 x .375-inch screws with captive washers
Two (2) 1/4-20 hex nuts with lock washers
Two (2) 1/4-inch flat washers
(Table 8).
step 7.
Table 8.