Chassis Door; Removing The Chassis Door; Replacing The Chassis Door; Removing Or Replacing A Chassis Door - HP A7990A - StorageWorks SAN Director 4/16 Blade Switch Hardware Reference Manual

Chassis door

The chassis door must be installed to ensure the DC Director meets EMI and other regulatory certifications.
The replacement procedure for the chassis door takes less than 5 minutes.

Removing the chassis door

To remove the chassis door (see
NOTE: The door is not hinged. It installs straight on the chassis by snapping four ball studs located on the
chassis into receiving hardware on the door in the cabinet.
1. Grip the side of the door.
2. Gently pull the door straight out from the chassis until it snaps out of the ball studs on the chassis.

Replacing the chassis door

To replace the chassis door (see
1. Align the holes in the door with the pins in the chassis
2. Push the door into place.
Figure 26

Removing or replacing a chassis door

64 Installing Field-replaceable units (FRUs)
Figure 26):
Figure 26):
26387a