Verify Correct Operation Of System - HP A7990A - StorageWorks SAN Director 4/16 Blade Switch Hardware Reference Manual

Verify correct operation of system

To verify that the DC Director is operating correctly:
1. Log in to the DC Director as admin:
rsl8-st03-dcx-1:admin> login
login: admin
password: xxxxxxxx
rsl8-st03-dcx-1:admin>
2. Type slotShow command and verify that all the installed cards are detected and that their status is
operational (enabled).
rsl8-st03-dcx-1:admin> slotShow
Slot Blade Type
---------------------------------
1 UNKNOWN
2 UNKNOWN
3 SW BLADE
4 UNKNOWN
5 CORE BLADE 52
6 CP BLADE
7 CP BLADE
8 CORE BLADE 52
9 UNKNOWN
10 SW BLADE
11 UNKNOWN
12 UNKNOWN
rsl8-st03-dcx-1:admin>
3. Verify that the DC Director is functioning correctly by typing switchShow or switchStatusShow.
94 Installing Field-replaceable units (FRUs)
ID Status
VACANT
VACANT
55 ENABLED
VACANT
ENABLED
50 ENABLED
50 ENABLED
ENABLED
VACANT
51 ENABLED
VACANT
VACANT