Table of Contents
Advertisement
Back up the configuration
Save all key configuration data for the DC Director, including license key information, and upload it to a
host for reference. Routine backups of the configuration are recommended to ensure the current
configuration is available.
After zoning configurations and other changes are complete, back up the configuration by typing
configUpload at the prompt. This command uploads the DC Director configuration to the server so that
it is available for downloading to a replacement DC Director.
An easy way to back up configuration information is to enable logging on your Telnet session; then
running the following commands and saving the output in a file on a secure host.
•
configShow
•
ipaddrShow
•
licenseShow
•
switchShow
Keep copies of key data such as passwords, license keys, and IP addresses in a secure location.
NOTE:
Passwords are not saved in the configuration file, and are not uploaded during a
configUpload.
46
Log in and configuration
Advertisement
Table of Contents
