Recommendations For Cable Management - HP A7990A - StorageWorks SAN Director 4/16 Blade Switch Hardware Reference Manual

3. Check the port LEDs to verify that all components are functional. For information about LED patterns,
see "Monitor system
4. Log in to the Director as admin.
5. Verify the correct operation of the FC4- 1 6IP blade ports by typing the switchShow command from the
Director command prompt. This command provides information about switch and port status.
sw48000:admin> switchshow
switchName:
switchType:
switchState:
switchMode:
switchRole:
switchDomain:
switchId:
switchWwn:
AD Feature:
Current AD:
zoning:
switchBeacon:
blade1 Beacon:
blade2 Beacon:
blade3 Beacon:
blade7 Beacon:
blade9 Beacon:
blade10 Beacon: OFF
Index Slot Port Address Media Speed State
===================================================
112 10
113 10
114 10
115 10
116 10
117 10
118 10
119 10
10
10
10
10
10
10
10
10
sw48000:admin>

Recommendations for cable management

Cables can be organized and managed in a variety of ways, such as by using cable channels or patch
panels, as follows:
• Plan cable management before installing the blade.
• Leave at least one meter of slack for each port cable. This provides room to remove and replace the
blades, and helps prevent the cables from being bent to less than the minimum bend radius.
114 Intelligent blades
components" on page 33.
sw48000
42.2
Online
Native
Subordinate
15
fffc0f
10:00:00:60:69:80:47:74
Active
0
ON (SIMPLE_CFG)
OFF
OFF
OFF
OFF
OFF
OFF
0 0f7000 id N4
1 0f7100 -- N4
2 0f7200 -- N4
3 0f7300 -- N4
4 0f7400 -- N4
5 0f7500 -- N4
6 0f7600 -- N4
7 0f7700 id N4
ge0 -- 1G
ge1 -- 1G
ge2 -- 1G
ge3 -- 1G
ge4 -- 1G
ge5 -- 1G
ge6 -- 1G
ge7 -- 1G
Proto
No_Light Disabled (Persistent)
No_Module Disabled (Persistent)
No_Module Disabled (Persistent)
No_Module Disabled (Persistent)
No_Module Disabled (Persistent)
No_Module Disabled (Persistent)
No_Module Disabled (Persistent)
No_Light Disabled (Persistent)
No_Sync ISCSI Disabled (Persistent)
No_Sync ISCSI Disabled (Persistent)
No_Sync ISCSI Disabled (Persistent)
No_Sync ISCSI Disabled (Persistent)
No_Sync ISCSI Disabled (Persistent)
No_Sync ISCSI Disabled (Persistent)
No_Sync ISCSI Disabled (Persistent)
No_Sync ISCSI Disabled (Persistent)