HP A7990A - StorageWorks SAN Director 4/16 Blade Switch Hardware Reference Manual page 95

This switchShow command displays DC Director and port status information.
rsl8-st03-dcx-1:admin> switchshow
switchName:
switchType:
switchState:
switchMode:
switchRole:
switchDomain:
switchId:
switchWwn:
zoning:
switchBeacon:
blade3 Beacon:
blade5 Beacon:
blade8 Beacon:
blade10Beacon:
Index Slot
===========================================================
32 3
33 3
34 3
35 3
36 3
10:00:00:00:c9:51:00:2d
37 3
rsl8-st03-dcx-1:admin>
4. Verify that all the IP address information is correct by typing ipAddrShow and checking the results
against the IP information recorded in the "config-miscinfo.txt" file.
rsl8-st03-dcx-1:admin> ipaddrshow
SWITCH
Ethernet IP Address: 10.32.50.12
Ethernet Subnetmask: 255.55.0.0
Fibre Channel IP Address: 1.2.3.4
Fibre Channel Subnetmask: 255.255.255.0
CP0
Ethernet IP Address: 10.32.50.10
Ethernet Subnetmask: 255.55.0.0
HostName : cp0
Gateway Address: 10.32.40.1
CP1
Ethernet IP Address: 10.32.50.11
Ethernet Subnetmask: 255.55.0.0
HostName : cp1
Gateway Address: 10.32.40.1
Backplane IP address of CP0 : 10.0.0.5
Backplane IP address of CP1 : 10.0.0.6
rsl8-st03-dcx-1:admin>rsl8-st03-dcx-1:admin>
rsl8-st03-dcx-1
62.1
Online
Native
Subordinate
11
fffc0b
10:00:00:05:1e:39:59:67
OFF
OFF
OFF
OFF
OFF
OFF
Port AddressMediaSpeedStateProto
0 0b2000idN4OnlineL-Port 5 public
1 0b2100__N8No_Module
2 0b2200__N8No_Module
3 0b2300__N8No_Module
4 0b2400idN4OnlineF-Port
5 0b2500__N8No_Module
DC SAN Backbone Director hardware reference guide 95