Using The Port Setting Tab; Enabling Or Disabling A Port; Enabling Trunking On A Port; Configuring Port Speed - HP A7340A - Surestore FC 1Gb/2Gb Switch 16B User Manual

Switch Admin Window

Using the Port Setting Tab

The Port Setting tab is used to perform the following operations on ports.

Enabling or Disabling a Port

To enable or disable a port, perform the following steps.
1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Port Setting tab.
4. Check or Uncheck the enabled port box that corresponds to the Port you wish
5. Click the Apply button.
6. Check the log at the bottom of the screen for information regarding the switch

Enabling Trunking on a Port

Perform the following steps to enable trunking on a port.
1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Port Setting tab.
4. Check the Trunk box that corresponds to the port you wish to trunk.
5. Click the Apply button.

Configuring Port Speed

The following procedure configures port speed.
1. Access the Switch Admin Window (see
2. Enter the admin user name and password.
3. Select the Port Setting tab.
118
on page 92).
to enable/disable.
configuration changes.
on page 92).
on page 92).
"About the Switch Admin
"About the Switch Admin
"About the Switch Admin
Web Tools Version 3.1.x/4.1.x User Guide
Window"
Window"
Window"