Ws-X6708-10G-3C And Ws-X6708-10G-3Cxl Ethernet Modules - Cisco 6513 - Catalyst Switch Installation Manual

10-Gigabit Ethernet Modules

WS-X6708-10G-3C and WS-X6708-10G-3CXL Ethernet Modules

The WS-X6708-10G-3C and WS-X6708-10G-3CXL Ethernet module
full- or half-duplex ports.
and environmental specifications.
Figure 2-25 WS-X6708-10G-3C and WS-X6708-10G-3CXL Ethernet Module Front Panel
Both of the modules (WS-X6708-10G-3C and WS-X6708-10G-3CXL) are identified on the faceplate as
Note
WS-X6708-10GE.
Table 2-54 WS-X6708-10G-3C and WS-X6708-10G-3CXL Ethernet Module Features
Feature
Ports per module
Port connector type
Cabling distance
Buffer size
QoS
Maximum frame size
Module oversubscription rate 2:1
Supervisor engine support
Software support
Catalyst 6500 Series Ethernet Modules Installation Guide
2-92
Table 2-52
Description
8 ports. Ports are numbered from 1 (left) to 8 (right).
•
1 port group
•
• Port ranges per port group: 1–8
SC or CX4 depending on the type of X2 transceiver installed in the
module port.
Depends on the X2 transceiver installed in the module port. Refer to
Appendix B for supported X2 transceiver types and cabling distances.
200 MB per port
Number of egress queues: 8
•
Number of ingress queues: 8
•
Number of thresholds per egress queue: 4
•
Number of thresholds per ingress queue: 4
•
Up to 9216 bytes
Supported on the following supervisor engines:
Supervisor Engine 720
•
Supervisor Engine 720-10GE
•
Check your release notes for specific information on the
Note
software release versions required to support the supervisor
engines.
With Supervisor Engine 720—12.2(18)SXF5
•
With Supervisor Engine 720-10GE—12.2(33)SXH
•
lists the module features, and
Chapter 2 Ethernet Switching Modules
(Figure 2-25) provides 8 10-Gbps
Table 2-53 lists the module physical
OL-6265-03