Cisco 6513 - Catalyst Switch Installation Manual page 108

10/100 and 10/100/1000 Ethernet Modules
WS-X6196-RJ-21 and WS-X6196-21AF Ethernet Modules
The WS-X6196-RJ-21 and the WS-X6196-21AF Ethernet modules, listed in
10/100-Mbps full- or half-duplex ports.
Table 2-21
Module
WS-X6196-RJ-21
WS-X6196-21AF
Figure 2-10 WS-X6196-RJ-21 Switching Module Front Panel
WS-X6196-RJ-21
1
60
8X12 PORT
10/100 BASE T
ETHERNET SWITCHING MODULE
Table 2-22
specifications.
With the PoE daughter card installed, the WS-X6196-RJ-21 module can support 96 Class 2 (7 W)
Note
devices or 62 Class 3 (15.4 W) devices per module.
Table 2-22 WS-X6196-RJ-21 and WS-X6196-21AF Ethernet Modules Features
Feature
Ports per module
Port connector type
Cabling distance
Buffer size
Catalyst 6500 Series Ethernet Modules Installation Guide
2-34
WS-X6196-RJ-21 Modules
Description
Base module without daughter cards installed.
Base module equipped with a factory-installed
IEEE 802.3af PoE daughter card (WS-F6K-GE48-AF).
12 13 24
49 72 61
lists the module features, and
Description
96 ports (both modules). Ports are numbered (left to right)
•
Top row of connectors—First connector, ports 1–12; second
–
connector, ports 13–24; third connector, ports 25–36; fourth
connector, ports 37–48.
Bottom row of connectors—First connector, ports 60–49;
–
second connector, ports 72–61; third connector, ports 73–84;
fourth connector, ports 85–96.
The bottom row of four RJ-21 connectors are inverted. The
Note
highest port number for a bottom row connector appears on the
left side of the connector and the connector's lowest port
number appears on the right side.
RJ-21 (both modules)
328 ft (100 m) over Category 5, 5e, and 6 UTP/STP cable (both
modules)
1.116 MB per port (both modules)
Figure 2-10 shows the module front panel.
25 36 37
84 73 96
Table 2-23 lists the module physical and environmental
Chapter 2 Ethernet Switching Modules
Table 2-21, provide 96
48
85
INLINE POWER
OL-6265-03