10/100/1000 Ethernet Ports; 100M/1G/2.5G/5G/10G Ethernet Ports - Cisco Catalyst 3650 Hardware Installation Manual

Front Panel
Figure 1-4
1
2
3

10/100/1000 Ethernet Ports

The 10/100/1000 Ethernet ports use RJ-45 connectors with Ethernet pinouts. The maximum cable length
is 328 feet (100 meters). The 100BASE-TX and 1000BASE-T traffic requires Category 5, Category 5e,
or Category 6 unshielded twisted pair (UTP) cable. The 10BASE-T traffic can use Category 3 or
Category 4 UTP cable.

100M/1G/2.5G/5G/10G Ethernet Ports

The 100M/1G/2.5G/5G/10G Ethernet ports use RJ45 connectors with Ethernet pinouts. These ports do
not support 10Mbps speed. The 100M and 1G traffic requires Category 5/5e/6 unshielded twisted pair
(UTP) cable at maximum cable length of 100 meters. The 2.5G traffic requires Category 5e/6/6a UTP
cable at maximum cable length of 100 meters. The 5G traffic requires Category 5e UTP cable at
maximum cable length of 70 meters and Category 6/6a UTP cable at maximum cable length of 100
meters. The 10G traffic requires Category 6 UTP cable at maximum cable length of 55 meters and
Category 6a UTP cable at maximum cable length of 100 meters.
Catalyst 3650 Switch Hardware Installation Guide
1-10
Catalyst 3650-48FQM Switches Front Panel
Mode button
Status LEDs
USB mini-Type B (console) port
4 USB Type A storage port
5
10/100/1000 PoE+ Ethernet ports
6
Uplink ports
Chapter 1 Product Overview
OL-29734-01