Cisco 6513 - Catalyst Switch Installation Manual page 119

Chapter 2 Ethernet Switching Modules
Table 2-29 WS-X6516-GE-TX Ethernet Module Features (continued)
Feature
Chassis/slot restrictions
Bus connection
Module upgrades available
PoE support
Distributed forwarding
support
Pluggable transceivers
support
TDR support
Module front panel LEDs
1. Verify that all LINK LEDs are functioning.
OL-6265-03
Description
No chassis or slot restrictions; the module can occupy any slot in any
Catalyst 6500 or Catalyst 6500-E chassis.
32-Gbps shared bus
Not supported.
Not supported.
Not supported.
Not supported.
STATUS
Green—All diagnostics pass; the module is operational.
•
Orange—The module is booting or running diagnostics.
•
An overtemperature condition has occurred. (A minor temperature
threshold has been exceeded during environmental monitoring.)
Red—The module is resetting. The switch has just been powered
•
on or the module has been hot inserted during the normal
initialization sequence.
An overtemperature condition has occurred. (A major temperature
threshold has been exceeded during environmental monitoring.)
If the module fails to download code and configuration information
successfully during the initial reset, the LED stays red; the module
does not come online.
LINK
Green—The port is active (the link is connected and operational).
•
• Orange—The module or port is disabled through the CLI command
or the module is initializing
• Flashing orange—The port is faulty and has been disabled.
Off—The port is not active or the link is not connected.
•
PHONE
Green—The PoE daughter card is installed and detected.
•
Off—The PoE daughter card is not detected or is not installed.
•
1
.
Catalyst 6500 Series Ethernet Modules Installation Guide
10/100 and 10/100/1000 Ethernet Modules
2-45