Cisco 6513 - Catalyst Switch Installation Manual page 226

10-GB Transceivers
Table B-15 X2 Transceiver Cabling Specifications
X2 Transceiver Connector
Product Number Type
X2-10GB-CX4 InfiniBand
4X
X2-10GB-SR SC duplex
X2-10GB-LX4 SC duplex
X2-10GB-LR SC duplex
X2-10GB-LRM SC duplex
5
X2-10GB-ER SC duplex
1. Cable distances are based on fiber loss. Additional factors, such as the number of splices and the optical quality of the fiber, can affect cabling distances.
The minimum cabling distance for optical X2 transceiver types (LX4, SR, LR, and ER) is 6.6 ft (2 m) according to the IEEE 802.3ae standard. The
minimum cabling distance for the X2-10GB-LRM is 1.6 ft (0.5 m) according to IEEE 802.3aq standard.
2. The Cisco X2-10GB-CX4 transceiver supports link lengths of up to 49.2 feet (15 m) on CX4 cable. Cisco offers four CX4 cables: CAB-INF-28G-1=
(1 meter cable), CAB-INF-28G-5= (5 meter cable), CAB-INF-28G-10= (10 meter cable), and CAB-INF-26G-15= (15 meter cable).
3. The Cisco X2-10GB-LX4 transceiver supports link lengths of 300 meters on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber
(MMF). To ensure that specifications are met, the transmitter output should be coupled through a mode conditioning patch cord. Cisco offers two mode
conditioning patch cords: CAB-GELX-625= (mode conditioning patch cable, 62.5 microns, dual SC connectors) and CAB-MCP50-SC= (mode
conditioning patch cable, 50 microns, dual SC connectors).
4. The Cisco X2-10GB-LRM transceiver supports link lengths of 220 meters on standard Fiber Distributed Data Interface (FDDI) grade multimode fiber
(MMF). To ensure that specifications are met over FDDI-grade, OM1 and OM2 fibers, the transmitter should be coupled through a mode conditioning
patch cord. Cisco offers two mode conditioning patch cords: CAB-GELX-625= (mode conditioning patch cable 62.5 microns, dual SC connectors) and
CAB-MCP50-SC= (mode conditioning patch cable 50 microns, dual SC connectors). No mode conditioning patch cord is required for applications using
OM3.
5. Requires a 5 db 1550 nm fixed loss attenuator for cable distances less than 12.43 miles (20 km). The attenuator is available from Cisco Systems
(p/n WS-X6K-5DB-ATT=)
Catalyst 6500 Series Ethernet Modules Installation Guide
B-14
Wavelength Cable Type
(nm)
— InfiniBand
(copper)
850 MMF
1310 MMF
1310 SMF
1310 MMF
1550 SMF
Appendix B
Core Size Modal
(microns) Bandwidth
(MHz/km
— —
62.5 160
62.5 200
50.0 400
50.0 500
50.0 2000
62.5 500
50.0 400
50.0 500
G.652 fiber —
62.5 500
50.0 400
50.0 500
G.652 fiber —
Pluggable Transceiver Modules
Maximum Cabling
1
Distance
2
49.2 ft (15 m)
85.3 ft (26 m)
108.3 ft (33 m)
216.5 ft (66 m)
269 ft (82 m)
984.3 ft (300 m)
3
984.3 ft (300 m)
787.4 ft (240 m)
984.3 ft (300 m)
6.21 mi (10 km)
4
722 ft (220 m)
328 ft (100 m)
722 ft (220 m)
24.84 mi (40 km)
OL-6265-03