10-Gigabit Ethernet Modules; Ws-X6704-10Ge Ethernet Module - Cisco 6513 - Catalyst Switch Installation Manual

Installation guide
Hide thumbs Also See for 6513 - Catalyst Switch:
Table of Contents

Advertisement

Chapter 2
Ethernet Switching Modules

10-Gigabit Ethernet Modules

This section describes the following 10-Gigabit Ethernet modules:
All of the 10-Gigabit Ethernet modules are hot swappable.
Note

WS-X6704-10GE Ethernet Module

The WS-X6704-10GE Ethernet module
Table 2-52
specifications.
Figure 2-24
WS-X6704-10GE Ethernet Module Front Panel
WS-X6704-10GE
PORT 1
TX
4 PORT 10 GIGABIT ETHERNET
Table 2-52
WS-X6704-10GE Ethernet Module Features
Feature
Ports per module
Port connector type
Cabling distance
Buffer size
QoS
Maximum frame size
Module oversubscription rate Approximately 1:1
OL-6265-03
WS-X6704-10GE Ethernet Module, page 2-87
WS-X6708-10G-3C and WS-X6708-10G-3CXL Ethernet Modules, page 2-92
WS-X6716-10G-3C and WS-X6716-10G-3CXL Ethernet Modules, page 2-96
WS-X6716-10T-3C and WS-X6716-10T-3CXL Ethernet Modules, page 2-100
lists the module features, and
PORT 2
PORT 3
RX
TX
RX
TX
RX
Description
4 ports. Ports are numbered from 1 (left) to 4 (right).
4 port groups
Port ranges per port group: 1 port in each group
SC or InfiniBand 4X depending on the type of XENPAK transceiver
installed in the module.
Depends on the XENPAK transceiver installed in the module port.
Refer to Appendix B for supported XENPAK transceiver types and
cabling distances.
16 MB
Number of egress queues: 8
Number of ingress queues: 1 (8 if DFC3x is present)
Number of thresholds per egress queue: 8
Number of thresholds per ingress queue: 8
Up to 9216 bytes
(Figure
2-24) provides 4 10-Gbps full- or half-duplex ports.
Table 2-53
lists the module physical and environmental
PORT 4
TX
RX
Catalyst 6500 Series Ethernet Modules Installation Guide
10-Gigabit Ethernet Modules
2-87

Advertisement

Table of Contents
loading

Table of Contents