Cisco 6513 - Catalyst Switch Installation Manual page 110

10/100 and 10/100/1000 Ethernet Modules
Table 2-22 WS-X6196-RJ-21 and WS-X6196-21AF Ethernet Modules Features (continued)
Feature
Pluggable transceivers
support
TDR support
Module front panel LEDs
Catalyst 6500 Series Ethernet Modules Installation Guide
2-36
Description
Not supported.
Not supported.
STATUS
Green—All diagnostics pass; the module is operational.
•
Orange—The module is booting or running diagnostics.
•
An overtemperature condition has occurred. (A minor temperature
threshold has been exceeded during environmental monitoring.)
Red—The module is resetting. The switch has just been powered
•
on or the module has been hot inserted during the normal
initialization sequence.
An overtemperature condition has occurred. (A major temperature
threshold has been exceeded during environmental monitoring.)
If the module fails to download code and configuration information
successfully during the initial reset, the LED stays red; the module
does not come online.
LINK
Green—The port is active (the link is connected and operational).
•
Orange—The module or port is disabled through the CLI command
•
or the module is initializing.
• Flashing orange—The port is faulty and has been disabled.
Off—The port is not active or the link is not connected.
•
PHONE
Green—The PoE daughter card is installed and detected.
•
Off—The PoE daughter card is not detected or is not installed.
•
Chapter 2 Ethernet Switching Modules
OL-6265-03