Cisco 6513 - Catalyst Switch Installation Manual page 237

Appendix C ESD Precautions
Figure C-1
ESD ground
strap
In addition, follow these guidelines when handling modules:
Handle carriers by available handles or edges only; avoid touching the printed circuit boards or
•
connectors.
Place a removed component board-side-up on an antistatic surface or in a static-shielding container.
•
If you plan to return the component to the factory, immediately place it in a static-shielding
container.
Never attempt to remove the printed circuit board from the metal carrier.
•
Caution For safety, periodically check the resistance value of the antistatic strap. The measurement should be
between 1 and 10 megohm (Mohm).
OL-6265-03
Attaching the ESD Wrist Strap Clip to the System Ground Lug Screw
Clip
Screw
Slide clip
behind screw
Clip installed
behind screw
WS-X6 K-SUP 2-2GE
CONSOL E
PORT
MODE
CONSOL E
SUPER VISOR 2
PCMCIA
OSM-4OC 12 POS-SI
4 PORT OC-12 POS SM
IR
OSM-4OC 12 POS-SI
4 PORT OC-12 POS SM
IR
Grounding lug
Side view of
grounding lug
System ground
connector
Switch Load
100%
PORT 1
PORT 2
EJECT
1%
Catalyst 6500 Series Ethernet Modules Installation Guide
Attaching Your ESD Grounding Strap
C-3