Cisco 6513 - Catalyst Switch Installation Manual page 93

Chapter 2 Ethernet Switching Modules
Table 2-11 WS-X6148-GE-TX and Variants Physical and Environmental Specifications (continued)
Item
Environment
Operating temperature
Humidity (RH) ambient
(noncondensing)
Operating altitude
WS-X6148-RJ21 Ethernet Modules
The WS-X6148-RJ21 Ethernet module and its two variants, listed in
10/100-Mbps full- or half-duplex ports.
Table 2-12
Module
WS-X6148-RJ21
WS-X6148-21AF
WS-X6148-RJ21V
Figure 2-6 WS-X6148-RJ-21 Ethernet Module Front Panel
WS-X6148-RJ-21
STATUS
48 PORT
Table 2-13
environmental specifications for the modules.
Table 2-13 WS-X6148-RJ-21 Ethernet Modules Features
Feature
Ports per module
Port connector type
OL-6265-03
Specification
Certified for operation: 32° to 104°F (0° to 40°C)
•
Designed and tested for operation: 32° to 130°F (0° to 55°C)
•
10 to 90%
• Certified for operation: 0 to 6500 ft (0 to 2000 m)
• Designed and tested for operation: –200 to 10,000 ft (–60 to 3000 m)
WS-X6148-RJ21 Ethernet Module Variants
Description
Base module without daughter cards installed.
Base module equipped with a factory-installed
IEEE 802.3af PoE daughter card (WS-F6K-GE48-AF).
Base module equipped with a factory-installed Cisco
prestandard PoE daughter card (WS-F6K-VPWR-GE).
10/100 BASE-T
ETHERNET
lists the features and descriptions for the modules, and
Description
• 48 ports (all variants). Ports are numbered from left to right. First
connector, ports 1–12; second connector, ports 13–24; third
connector, ports 25–32; fourth connector, ports 33–48.
4 port groups
•
Port ranges per port group: 1–12, 13–24, 25–36, 37–48
•
RJ-21 (all variants)
Figure 2-6 shows the module front panel.
SWITCHING MODULE PHONE
Catalyst 6500 Series Ethernet Modules Installation Guide
10/100 and 10/100/1000 Ethernet Modules
Table 2-12, provide 48
Table 2-14 lists the physical and
2-19