Cisco 6513 - Catalyst Switch Installation Manual page 228

Installation guide
Hide thumbs Also See for 6513 - Catalyst Switch:
Table of Contents

Advertisement

WDM Transceivers
Table B-18
WDM Transceivers
WDM Transceiver
Description
Type
CWDM GBIC
The CWDM GBIC transceivers provide
1000BASE-X full-duplex connectivity
between the GBIC-compatible
modules, supervisor engines, and the
network. A set of eight CWDM GBICs
are available for use with the CWDM
Passive Optical System. The CWDM
GBIC transceivers have a duplex SC
connector.
DWDM GBIC
DWDM GBIC transceivers are used as
part of a DWDM optical network to
provide high-capacity bandwidth across
an optical fiber network. There are 32
fixed-wavelength DWDM GBICs that
support the International
Telecommunications Union (ITU)
100-GHz wavelength grid. The DWDM
GBIC transceivers have a duplex SC
connector.
R/O WDM GBIC
The R/O WDM GBIC receiver
(WDM-GBIC-REC) operates as a
pluggable receiver on any
unidirectional link in a CWDM or
DWDM transport network; there is no
transmitter in the GBIC. The receiver
can be used for all wavelengths
supported by Cisco CWDM and
DWDM transceivers and can be used
interchangeably with 1000BASE-SX,
1000BASE-LX/LH, and
1000BASE-ZX transceivers on a
port-by-port basis. The W/O WDM
receiver has a single SC connector.
Catalyst 6500 Series Ethernet Modules Installation Guide
B-16
Appendix B
Supported on these
1
Modules
WS-X6408A-GBIC
WS-X6416-GBIC
WS-X6516-GBIC
WS-X6516A-GBIC
WS-X6816-GBIC
WS-X6408A-GBIC
WS-X6416-GBIC
WS-X6516-GBIC
WS-X6516A-GBIC
WS-X6816-GBIC
WS-X6408A-GBIC
WS-X6416-GBIC
WS-X6516-GBIC
WS-X6516A-GBIC
WS-X6816-GBIC
Pluggable Transceiver Modules
WDM
WDM Transceiver
Transceiver
Specification
Illustration
Table
Figure B-9
Table B-19
Figure B-10
Table B-20
OL-6265-03

Advertisement

Table of Contents
loading

Table of Contents