Cisco 6513 - Catalyst Switch Installation Manual page 115

Installation guide
Hide thumbs Also See for 6513 - Catalyst Switch:
Table of Contents

Advertisement

Chapter 2
Ethernet Switching Modules
Table 2-27
WS-X6348-RJ45 and WS-X6348-RJ45V Ethernet Modules Features
Feature
Ports per module
Port connector type
Cabling distance
Buffer size
QoS
Maximum frame size
Module oversubscription rate N/A
Supervisor engine support
Software support
Queues per port
Chassis/slot restrictions
OL-6265-03
Description
48 ports (both modules). Ports are numbered (left to right):
Top row, odd numbered ports 1 through 47.
Bottom row, even numbered ports 2 through 48.
4 port groups
Port ranges per port group: 1–12, 13–24, 25–36, 37–48
RJ-45 (both modules)
328 ft (100 m) over Category 5, 5e, and 6 UTP/STP cable (both
modules)
128 KB per port (both modules)
Number of egress queues: 2
Number of ingress queues: 1
Number of thresholds per egress queue: 2
Number of thresholds per ingress queue: 4
Up to 8092 bytes per frame (both modules)
Supported on the following supervisor engines:
Supervisor Engine 2
Supervisor Engine 32
Supervisor Engine 32 PISA
Supervisor Engine 720
Supervisor Engine720-10GE
With Supervisor Engine 2—12.1(2)E
With Supervisor Engine 32—12.2(18)SXF
With Supervisor Engine 32 PISA—12.2(18)ZY
With Supervisor Engine 720—12.2(14)SX
With Supervisor Engine720-10GE—12.2(33)SXH
Both modules:
Tx—2q2t
Rx—1q4t
No chassis or slot restrictions; the modules can occupy any slot in any
Catalyst 6500 or Catalyst 6500-E chassis.
10/100 and 10/100/1000 Ethernet Modules
Catalyst 6500 Series Ethernet Modules Installation Guide
2-41

Advertisement

Table of Contents
loading

Table of Contents