Cisco 6513 - Catalyst Switch Installation Manual page 144

1-Gigabit Ethernet Modules
Table 2-44 WS-X6516-GBIC and WS-X6516A-GBIC Features (continued)
Feature
Software support
Queues per port
Chassis/slot restrictions
Bus connection
Module upgrades available
PoE support
Distributed forwarding
support
Pluggable transceivers
support
Catalyst 6500 Series Ethernet Modules Installation Guide
2-70
Description
With Supervisor Engine 2—12.1(18a)E, WS-X6516-GBIC;
•
12.1(19)E1, WS-X6516A-GBIC
With Supervisor Engine 32—12.2(18)SXF
•
With Supervisor Engine 32 PISA—12.2(18)ZY
•
With Supervisor Engine 720—12.2(14)SX
•
With Supervisor Engine 720-10GE—12.2(33)SXH
•
Both modules:
Tx—1p2q2t
•
Rx—1p1q4t
•
No chassis or slot restrictions; the module can occupy any slot in any
Catalyst 6500 or Catalyst 6500-E chassis.
32-Gbps shared bus
Not supported.
Can be field-upgraded with either the WS-F6K-DFC,
WS-F6K-DFC3B, or WS-F6K-DFC3BXL daughter cards.
Refer to the Catalyst 6500 Series DFC, DFC3A, DFC3B, and
DFC3BXL Installation Note for additional information and field
upgrade procedures.
GBIC transceivers are supported. Refer to your software release notes
to determine which GBIC transceivers are supported. See the
Transceivers" section on page B-3
information on the GBIC transceivers.
Chapter 2
in Appendix B for additional
Ethernet Switching Modules
"1-GB
OL-6265-03