Ws-X6348-Rj21V Ethernet Module - Cisco 6513 - Catalyst Switch Installation Manual

10/100 and 10/100/1000 Ethernet Modules

WS-X6348-RJ21V Ethernet Module

The WS-X6348-RJ21V Ethernet module
ports.
environmental specifications for the module.
Figure 2-11 WS-X6348-RJ21V Switching Module
WS-X6348-RJ21
STATUS
48 PORT
Table 2-24 WS-X6348-RJ21V Features
Feature
Ports per module
Port connector type
Cabling distance
Buffer size
QoS
Maximum frame size
Module oversubscription rate N/A
Supervisor engine support
Software support
Catalyst 6500 Series Ethernet Modules Installation Guide
2-38
Table 2-24 lists the features and description for the module, and
10/100 BASE-T
ETHERNET
Description
48 ports.Ports are numbered (left to right):
•
First connector, ports 1 to 12; second connector, ports 13–24;
–
third connector, ports 25–32; fourth connector, 33–48.
4 port groups
•
Port ranges per port group: 1–12, 13–24, 25–36, 37–48
•
RJ-21 (12 ports per connector)
328 ft (100 m) over Category 5, 5e, and 6 UTP/STP cable
128 KB
Number of egress queues: 2
•
Number of ingress queues: 1
•
• Number of thresholds per egress queue: 2
• Number of thresholds per ingress queue: 4
Up to 8092 bytes per frame
Supported on the following supervisor engines:
Supervisor Engine 2
•
Supervisor Engine 32
•
• Supervisor Engine 32 PISA
• Supervisor Engine 720
• Supervisor Engine720-10GE
With Supervisor Engine 2—12.1(8a)EX
•
With Supervisor Engine 32—12.2(18)SXF
•
With Supervisor Engine 32 PISA—12.2(18)ZY
•
With Supervisor Engine 720—12.2(14)SX
•
With Supervisor Engine720-10GE—12.2(33)SXH
•
(Figure 2-11) provides 48 10/100-Mbps full- or half-duplex
SWITCHING MODULE PHONE
Chapter 2 Ethernet Switching Modules
Table 2-25 lists the physical and
OL-6265-03