Canon imagePROGRAF iPF610 User Manual page 378

Printing banners or at other non-standard sizes
4.
Make sure the Main sheet is displayed.
5.
A
In the Media Type list, select the type of paper that is loaded. In this case, click Plain Paper.
6.
After conrming that
list.
7.
Click the Page Setup tab to display the Page Setup sheet.
8.
O
Click Size Options to display the Media Size Options dialog box.
9.
Complete the following settings in the Media Size Options dialog box.
1.
Enter a desired paper name in Custom Media Size Name. "430 mm Square" is used in this example.
2.
Select mm or inch in Units.
3.
Enter "430" [16.9 in] in both Width and Height.
Note
•
If you select the Fix the Ratio of the Width to Height check box, after you enter a value in either
Width or Height, the other value will be automatically applied based on the original aspect ratio.
364 Enhanced Printing Options
D
Easy Settings is selected, click Scanned Image in the
E
Print Target