Replotting With Hp-Gl/2 Jobs Is Not Possible - Canon imagePROGRAF iPF610 User Manual

HP-GL/2 problems

Replotting with HP-GL/2 jobs is not possible.

The data was lost because of replotting.
Printed Colors in Line Drawings are Inaccurate During
HP-GL/2 Printing
AdjustFaintLines in the main menu is set to On.
690 Troubleshooting
Cause
Cause
Corrective Action
Data for replotting is lost after the following
operations. In this case, send the print job again.
•
The memory buffer was cleared from the Control
Panel.
•
The printer was turned off.
•
The printer has received a new HP-GL/2 print job.
•
Printing has been canceled
Corrective Action
Selecting Off may help produce the expected results.
However, lines in some colors may appear broken.