Canon imagePROGRAF iPF610 User Manual page 628

Adjusting the feed amount
6.
Examine test pattern C1 for adjustment. After you determine the pattern in which streaks are
least noticeable, press the ▲ or ▼ to choose the pattern number, and then press the OK button.
C2 is displayed on the Control Panel.
7.
Examine test pattern C2 for adjustment. After you determine the pattern in which streaks are
least noticeable, press the ▲ or ▼ to choose the pattern number, and then press the OK button.
The printer now goes back online.
Note
•
If streaks seem least noticeable in two patterns but you cannot decide which one is better, choose an
intermediate value. For example, choose 11 if you cannot decide whether pattern 10 or 12 is better.
614 Maintenance