Paper Jam; Cannot Cut Paper - Canon imagePROGRAF iPF610 User Manual

Messages regarding paper

Paper jam.

A paper jam occurred in the printer during printing.
You have loaded and printed on a roll when sheets
are selected as the paper source on the Control
Panel.

Cannot cut paper.

There are sheets left on the Output Tray.
There is a foreign object by the Output Tray,
obstructing the Cutter Unit.
You are not using the printer under the recommended
environmental conditions for the paper.
You are using paper that is not compatible with
automatic cutting.
The Cutter Unit stops in the middle of cutting.
In other cases, the Cutter Unit may be damaged.
708 Error Message
Cause
Cause
Corrective Action
Press the Load/Eject button and remove the jammed
paper.
(→P.144)
(→P.182)
Press the Load/Eject button, remove the roll, and
load a sheet. Otherwise, select the roll as the media
source on the Control Panel and reload the roll.
Corrective Action
Remove the paper.
Remove the foreign object.
Use the printer only where the recommended
environmental conditions for the paper are met.
Note that various environmental conditions are
recommended for various types of paper. For details
on the recommended environmental conditions for
paper, see "Types of Paper". (→P.112)
Cut the roll manually.
(→P.135)
Move the Cutter Unit to the left, and then remove the
roll paper. If the roll cannot be cut using the Cutter
Unit, cut the roll manually.
(→P.135)
Contact your Canon dealer for assistance.