Canon imagePROGRAF iPF610 User Manual page 387

6.
Click the Page Setup tab to display the Page Setup sheet.
7.
A
In the Page Size list, click the size you registered, "My Horizontal Banner."
8.
C
Select the Enlarged/Reduced Printing check box.
Note
•
If the Enlarged/Reduced Printing check box is not displayed on the Page Setup sheet, clear the
B
Borderless Printing check box.
9.
Click Roll Paper in the
10.
E
After you click
11.
Select the width of the loaded roll in the Roll Paper Width list. In this case, click 16-in. Roll
(406.4mm), and then click OK.
L
Media Source list.
Fit Roll Paper Width, the Information dialog box is displayed.
Printing banners or at other non-standard sizes
Enhanced Printing Options 373