Other Messages; Prepare For Parts Replacement; Garo Wxxxx (X Represents A Number); Top Cover Is Open - Canon imagePROGRAF iPF610 User Manual

Other Messages

Other Messages

GARO Wxxxx (x represents a number)

There is a problem with the print job.

Top cover is open.

The printer has detected that the Top Cover is open.
ERROR Exxx-xxxx (x represents a letter or number)
In the following situations, turn off the printer and wait at least three seconds before restoring power.
If the message is still displayed, write down the error code and message, turn off the printer, and contact your
Canon dealer for assistance.
•
"ERROR" is displayed, followed by the error code and Call for service.
Unknown le.
Invalid data format.

Prepare for parts replacement.

It is almost time to replace consumables for which
service is required.
718 Error Message
Cause
Cause
Cause
Cause
Corrective Action
Try printing again, using the correct printer driver.
It is also possible to continue printing in this state.
However, you may not be able to obtain the desired
printing results.
Corrective Action
Open the Top Cover fully, remove any foreign objects,
and close the Top Cover again.
If the error occurs again, turn off the printer and wait
a while before restoring power.
Corrective Action
Check the print job and resend it.
Corrective Action
If Parts replacement time has passed. is displayed,
you can continue to use the printer for some time.
Contact your Canon dealer for assistance.