Adjusting The Vacuum Strength - Canon imagePROGRAF iPF610 User Manual

Adjusting the feed amount

Adjusting the Vacuum Strength

When printing on heavyweight paper or paper that curls or wrinkles easily, if paper rubs against the printer or
the edge is wrinkled from rubbing, adjusting the level of suction against paper on the Platen may improve
results.
1.
Press the Menu button to display MAIN MENU.
2.
Press ▲ or ▼ to select Paper Details, and then press the ► button.
3.
Press ▲ or ▼ to select the type of paper, and then press the ► button.
4.
Press ▲ or ▼ to select VacuumStrngth, and then press the ► button.
5.
Press ▲ or ▼ to select the level of suction against paper on the Platen, and then press the
OK button.
Important
•
If you switch to another type of paper after printing, reset the suction level on the Platen to Automatic.
610 Maintenance