Cannot Adjust Band; Messages Regarding Printheads; Pheads: Wrong Pos - Canon imagePROGRAF iPF6200 User Manual

Messages regarding printheads

Cannot adjust printhead.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for Printhead adjustment.

Cannot adjust band.

The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.
x printhead needs cleaning. (x is Left or Right)
The Printhead nozzles are clogged.

PHeads: wrong pos.

The left Printhead is installed in the right position and
vice versa.
Cause
Cause
Cause
Cause
Corrective Action
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.624)
2.
Clean the Printhead if the nozzles are clogged.
(→P.625)
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.572)
Corrective Action
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.624)
2.
Clean the Printhead if the nozzles are clogged.
(→P.625)
Adjust the feed amount manually.
(→P.580)
Corrective Action
Specify Printhead cleaning options. (→P.625)
If the message is still displayed after you execute
Head Cleaning B two or three times, contact your
Canon dealer for assistance.
Corrective Action
Turn off the printer and wait at least three seconds
before restoring the power. If the message is
displayed again, contact your Canon dealer for
assistance.
Messages regarding printheads
Error Message 701