Messages regarding printing or adjusment
Messages regarding printing or adjusment
Use another paper.
The Printhead and feed amount cannot be adjusted
when highly transparent lm is loaded.
Cannot print as specied.
Lift the release lever and replace paper with A4/LTR (vertical) or larger
The loaded paper is too small.
Lift the release lever and replace roll with 10 in. wide or larger roll
The loaded paper is too small.
Cannot adjust band.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.
Cannot adjust printhead.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for Printhead adjustment.
640 Error Message
Cause
Cause
Cause
Cause
Cause
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.542)
Adjust the feed amount manually.
(→P.552)
Corrective Action
Switch to paper A4/Letter (vertical) or larger.
Corrective Action
Load a roll 10 inches wide or larger.
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.567)
2.
Clean the Printhead if the nozzles are clogged.
(→P.568)
Adjust the feed amount manually.
(→P.552)
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.567)
2.
Clean the Printhead if the nozzles are clogged.
(→P.568)
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.542)
Corrective Action
Corrective Action
Corrective Action