Canon imagePROGRAF iPF610 User Manual page 604

Network Setting (Macintosh)
Conguring the Destination (Mac OS 9)
1.
Choose Chooser from the Apple menu to display the Chooser window.
2.
In AppleTalk, click Active.
3.
Close the Chooser window.
4.
Click AppleTalk under Control Panels to display the AppleTalk window.
5.
In Connect via, choose Built-in Ethernet.
6.
Close the AppleTalk window and save the settings.
7.
Choose Chooser from the Apple menu to display the Chooser window.
8.
In the list at left, click GARO Printer Driver.
9.
In the Destination list at right, select AppleTalk, and then select the printer in the list below.
10.
Close the Chooser window and click OK after the conrmation message is displayed.
590 Network Setting