Canon imagePROGRAF iPF610 User Manual page 141

6.
Specify the type and length of the paper.
How the printer operates after the paper is fed varies depending on the setting for automatic
detection of the remaining roll paper, as well as the barcode printed on rolls.
Automatic Detection of the
Remaining Roll Paper
On
Off
7.
Close the Roll Feed Unit Cover with one hand, as shown.
8.
If the edge of the roll is bent or soiled, cut the edge of the paper.
1.
Press the Online button to bring the printer ofine.
2.
Press ▲ or ▼ to feed the roll paper to the position for cutting.
3.
Select Yes in Paper Cutting on Printer Menu, and then press the OK button. (→P.135)
Barcodes Printer Operation After the Paper is Fed
Printed The type and amount of paper left is automatically
detected based on the barcode printed on the roll.
There is no need to specify the type and length of
the paper.
Not printed You must specify the type and length of the paper.
A menu for selection of the paper type and length
is automatically shown on the Display Screen.
(→P.130)
(→P.131)
Printed You must specify the type of paper.
(→P.130)
Not printed
Handling rolls
Handling Paper 127