Media Type Not Compatible With Cassette; No Cassette Loaded - Canon imagePROGRAF iPF610 User Manual

Messages regarding paper
Insufcient paper for job
The printer has received a print job longer than the
amount of roll paper left.

Media Type not compatible with cassette.

The printer has received a print job specifying the
Cassette as the media source, but this paper is not
compatible with the Cassette.

No cassette loaded

The Cassette is not fully inserted.
702 Error Message
Cause
Cause
Cause
Corrective Action
Follow the steps below to replace the roll.
1.
Remove the roll.
(→P.128)
(→P.123)
2.
Load a roll with enough paper left.
(→P.121)
(→P.124)
3.
If no barcode was printed on the roll, specify the
paper type.
(→P.130)
4.
Specify the paper length, unless a barcode has
been printed on the roll and you have deactivated
the automatic detection function of the remaining
roll paper.
(→P.131)
Hold down the Stop button for a second or more to
cancel printing.
Press the Online button to resume printing.
However, the roll paper may run out during the
print job and you may not be able to print all of the
document.
Corrective Action
1.
Make sure you are using the correct printer driver
for the printer.
2.
Load paper compatible with the Cassette, change
the printer driver settings to match it, and try
printing again. For details on supported paper,
refer to the Paper Reference Guide. (→P.112)
Corrective Action
Remove the Cassette and reinsert the Cassette
rmly, all the way.