Messages Regarding Printheads; Phead Needs Cleaning - Canon imagePROGRAF iPF610 User Manual

Messages regarding printheads

Messages regarding printheads
Cannot adjust printhead.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for Printhead adjustment.
Cannot adjust band.
The Printhead nozzles are clogged.
Highly transparent lm is loaded that cannot be used
for feed amount adjustment.

PHead needs cleaning.

The Printhead nozzles are clogged.
714 Error Message
Cause
Cause
Cause
Corrective Action
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.625)
2.
Clean the Printhead if the nozzles are clogged.
(→P.626)
We recommend using a type of paper that you often
use, other than lm, for Printhead adjustment.
(→P.599)
Corrective Action
Follow the steps below to check the nozzles.
1.
Print a test pattern to check the nozzles.
(→P.625)
2.
Clean the Printhead if the nozzles are clogged.
(→P.626)
Adjust the feed amount manually.
(→P.607)
Corrective Action
Specify Printhead cleaning options. (→P.626)
If the message is still displayed after Head Cleaning
B, contact the Canon dealer for assistance.