HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual page 60

Installing and Configuring the Edge Switch 2/24
2.
Figure 14: D
3. Enter a switch description (for example, edge-32) the Description field.
4.
5.
6. At the Data Source for Domain area of the dialog box, select the Use auto
7. Click OK to save the entered information, close the dialog box, and define the
8. Repeat
9. Click OK to close the Discover Setup dialog box and return to the HAFM
60
Click Add. The Domain Information dialog box displays with the IP Address page
open by default (Figure
omain Information dialog box (IP Address Page)
Also, the value for R_A_TOV must be greater than the value configured for
E_D_TOV.
the switch IP address (determined by the customer's network
administrator) in the IP Address field.
Also, the value for R_A_TOV must be greater than the value configured for
E_D_TOV.
the switch subnet mask (determined by the customer's network
administrator) in the Subnet Mask field.
detection, Use the server, or Use a specific RDC radio button (determined by
the customer's network administrator).
switch to the HAFM application.
step 2 through
application.
14).
step 7 for each new switch.
Edge Switch 2/24 Installation Guide