Add A Firmware Version - HP 316095-B21 - StorageWorks Edge Switch 2/24 Installation Manual

Add a Firmware Version

The firmware version shipped with the Edge Switch is provided on the Edge
Switch 2/24 documentation CD. Subsequent firmware versions to upgrade the
Edge Switch are provided to customers through the HP web site.
Note:
notes that accompany the firmware version. This information supplements information
provided in this general procedure.
se these steps to add an edge switch firmware version to the library stored on the
HAFM appliance hard drive:
1. Obtain the new firmware version from the HP web site:
Note:
2. At the HAFM application's physical map, right-click the product icon
Edge Switch 2/24 Installation Guide
When adding a firmware version, follow procedural information in the release
The following path is subject to change.
a. At the HAFM appliance or other personal computer (PC) with Internet
access, open the HP web site. The uniform resource locator (URL) is
http://www.hp.com/country/us/eng/support.html.
b. Click on Firmware Downloads in left panel.
c. Click the Switch Firmware Version XX.YY.ZZ entry. The XX.YY.ZZ
is the desired version. The Windows Save As dialog box displays.
Verify or correct the directory path specified in the Save in field and the
file name specified in the File name field.
d. Click Save. The new firmware version is downloaded and saved to
HAFM appliance or PC hard drive.
e. If the new firmware version was downloaded to a PC (not the HAFM
appliance), transfer the firmware version file to the switch by backup
disk, CD-ROM, or other electronic means.
representing the switch for which a firmware version is to be added, then
select Element Manager from the pop-up menu. The application opens.
Manage Firmware Versions
115