Figure 7-11. Omega Thermocouple - Intel CELERON PROCESSOR E3000 - THERMAL AND MECHANICAL DESIGN Design Manual
Thermal and mechanical design guidelines
Hide thumbs
Also See for CELERON PROCESSOR E3000 - THERMAL AND MECHANICAL DESIGN:
- Datasheet (100 pages) ,
- Design manual (126 pages)
Table of Contents
Advertisement
Item
Solder
Flux
Loctite* 498
Adhesive
Adhesive
Accelerator
Kapton* Tape
Thermocouple
Ice Point Cell
Hot Point Cell
NOTES:
1.
2.
Figure 7-11. Omega Thermocouple
84
Indium Corp. of America
Alloy 57BI / 42SN / 1AG 0.010 Diameter
Indium Corp. of America
Super glue w/thermal characteristics
Loctite* 7452 for fast glue curing
For holding thermocouple in place
Omega *,36 gauge, "T" Type
(see note 2 for ordering information)
Omega*, stable 0 ºC temperature source for
calibration and offset
Omega *, temperature source to control and
understand meter slope gain
The Solder Station consisting of the Heater Block, Heater, Press and Transformer are
available from Jemelco Engineering 480-804-9514
This part number is a custom part with the specified insulation trimming and packaging
requirements necessary for quality thermocouple attachment, See Figure 7-11. Order
from Omega Anthony Alvarez, Direct phone (203) 359-7671,
Direct fax (203) 968-7142, E-Mail: aalvarez@omega.com
Case Temperature Reference Metrology
Description
Miscellaneous Hardware
Calibration and Control
Thermal and Mechanical Design Guidelines
Part Number
52124
5RMA
49850
18490
Not Available
OSK2K1280/5SR
TC-TT-T-36-72
TRCIII
CL950-A-110
Advertisement
Table of Contents
