Rear Shock Absorber - HYOSUNG COMET 125 Service Manual

REAR SHOCK ABSORBER

REMOVAL
Remove the rear shock absorbers by removing
their nuts.
INSPECTION
Inspect the rear shock absorber for damage and
oil leakage. If any defects are found, replace the rear
shock absorber with a new one.
CAUTION
Do not attempt to disassemble the rear shock
absorber. It is unserviceable.
REMOUNTING
Install the rear shock absorber and tighten the nuts to
the specified torque.
Shock absorber mounting nut (upper)
Shock absorber mounting nut (lower)
: 40~60 N m (4.0~6.0 kg m)
: 40~60 N m (4.0~6.0 kg m)
CHASSIS 6-36