HYOSUNG COMET 125 Service Manual page 135

6-11 CHASSIS
MASTER CYLINDER INSPECTION
Inspect the master cylinder bore for any scratches or
other damage.
Inspect the piston surface for any scratches or other
damage.
MASTER CYLINDER REASSEMBLY
Reassemble the master cylinder in the reverse order of
disassembly.
Pay attention to the following points :
CAUTION
Wash the master cylider components with new
brake fluid before reassembly.
When washing the components, use the speci-
fied brake fluid. Never use different types of
fluid or cleaning solvents such as gasoline,
kerosine, etc.
Specification and Classification
NOTE
When installing the circlip, make sure that the sharp
edge of the circlip faces outside.
When remounting the master cylinder to the
handlebars, first tighten the clamp bolts for
upside as shown.
WARNING
Bleed air from the brake fluid circuit after
reassembling master cylinder.(See page 2-16)
: DOT 3 or DOT 4
Master Cylinder
Up
Clearance
Handlebar