HYOSUNG COMET 125 Service Manual page 147

6-23 CHASSIS
INSPECTION
FRONT FORK SPRING
Measure the free length of the front fork spring
If the length is found shorter than the service limit,
replace the spring.
Fork spring free length
INNER TUBE AND OUTER TUBE
Check the sliding surface of the inner tube, outer
tube and damper rod ring for scratch, wear, bend-
ing, or other abnormal condition.
REASSEMBLY
Perform the reassembly and remounting work in the
reverse order of the disassembly and removal proce-
dures while observing the following instructions.
Thoroughly wash all the component parts being assembled.
Insufficient washing can result in oil leakage or premature wear of the parts.
When reassembling the front fork, use new fork oil.
Use the specified fork oil for the front fork.
When reassembling, replace the slide metals, oil seal, dust seal and damper rod bolt gasket with new ones.
On the inner tube, assemble the following parts.
Dust seal
Oil seal stopper ring
Oil seal
Oil seal retainer
Slide metal
Guide bushing
To prevent the lip of oil seal
aged, cover the inner tube with vinyl sheet
ing installation.
Service limit
354 mm (13.9 in)
CAUTION
from being dam-
.
CAUTION
dur-