HYOSUNG COMET 125 Service Manual page 43

ENGINE SPOCKET
Loosen the rear axle nut and chain adjusters, left
and right.
Install the engine sprocket.
Tighten the engine sprocket nut
torque.
Engine sprocket nut
: 80~100 N m (8.0~10.0 kg m)
NOTE
When tightening the engine sprocket nut,
depress the rear brake pedal.
Bend the lock washer securely.
Install the gearshift arm and adjust the gearshift lever
height.(Refer to page 2-9)
Connect each electric part and its couplers.(Refer to
page 7-23~30)
Install the exhaust pipes and mufflers.
Install the carburetor and air cleaner.
After remounting the engine, the following adjust-
ments are necessary.
Engine idling speed
Throttle cable play
Clutch cable play
Drive chain
Gearshift lever height
Engine oil level
to the specified
Refer to page 2-7
Refer to page 2-7
Refer to page 2-8
Refer to page 2-11
Refer to page 2-9
Refer to page 2-9
ENGINE 3-6